Santyn CCTV Systems

Specification

The system is a fully automatic digital hard disc based system.
It is available with 4, 8, 12 or 16 colour camera inputs.
It can be configured to ignore unused inputs.
There are no user controls.
Security covers protect all connections.
The system is able to tolerate mains power failure and automatically resumes operations when power is restored irrespective of duration of power failure.
The system is able to supply 12V to power cameras to a maximum of 8A.
The system status information and full system configuration is possible via a web browser on a remote computer.
The system will keep accurate time and allow automatic adjustment of date and time from an external network time server.
The system detects loss of signal from a camera, due to cut cable or power loss.
When the systems detects loss of signal from a camera or detects motion it can notify users by playing a selectable sound or sending an email.
A modem is available as a factory fitted option allowing a direct connection via a telephone line from any computer with a modem using standard dial-up networking.
The system can provide multiplexed live views, providing a signal suitable for a computer monitor or optionally composite video suitable for a TV.

All cameras may be labeled and this information, along with date and time, will be viewed and recorded with the images.
The system features movement detection to trigger recording.
The movement detection threshold and the noise threshold are adjustable.
Movement masking allows the system to ignore motion in parts of the image.
To comply with data protection policy the length of time that recordings are held on the system is configurable.
The standard internal hard drive will allow approximately 400 hours of recording.
Multiple disk configurations and larger capacity disks are supported.
If the hard disk becomes full recordings are automatically deleted - oldest first.

Recordings are kept in a standard file format to allow viewing on any modern standard PC.
All recordings are organised to make finding a specific incident easy.
Immediate snapshots of the attached cameras, and live action views are available via a network connection.
The frame rate of live action views is configurable to overcome potential bandwidth constraints
Separate screens optimised for viewing on a PDA are provided.

Remote access to the system via a LAN or the Internet is provided.
Communication with the system uses standard Internet protocols that can be accessed from behind firewalls and proxy servers.
The system has a built-in firewall which prohibits access to network ports that are not required for the system to operate.
All network communication with the system is encrypted and password protected.
The system provides a log of all changes to system settings and all recordings downloaded.
Various levels of access are provided to prevent unauthorised access to the various parts of the system.
The system allows verification that recordings have not been tampered with.
Network parameters, such as IP address, gateway, etc are configurable.
The system can notify users of motion detected or signal loss by sending an email or playing a pre-selected sound via optional loudspeakers.

Dimensions: Width 335mm Height 185mm Depth 355mm